Residential · Cape Coral, FL
Metallic epoxy flooring turns plain concrete into a seamless, high-gloss surface with a flowing, 3D look. Elite Epoxy Cape Coral has served Cape Coral since 2015, installing and repairing metallic epoxy systems for garages, showrooms, offices, and retail floors.
A metallic floor only looks as good as the slab under it, so we start with measurable prep. We diamond-grind to the right Concrete Surface Profile (typically CSP 2-3 for metallic systems), repair spalls and cracks with 100 percent solids epoxy paste or polyurea filler, and address oil contamination with degreasing and mechanical abrasion. Moisture is verified with concrete moisture testing, then we install the correct primer (moisture-mitigating epoxy when needed) and a pigmented base coat that sets the tone for the metallic movement.
Southwest Florida humidity and temperature swings can affect open time, cure rate, and gloss retention, so product selection and timing matter. We use high-solids epoxy with metallic pigments, control airflow and staging, then manipulate the surface with squeegees, rollers, and spiked shoes to create consistent marbling instead of blotchy swirls. After the metallic layer cures, we lock it in with a clear topcoat, typically a UV-stable polyaspartic or polyurethane, with an optional aluminum-oxide traction additive for safer wet areas. For repairs, we color-match as closely as possible, feather transitions, and re-topcoat to restore uniform sheen and chemical resistance.
Cape Coral customers choose us because we install metallic epoxy like a coating system, not paint. You get disciplined surface prep with commercial diamond grinders and HEPA dust control, clear scope and written steps, and materials chosen for the space, from chemical-resistant primers to abrasion-resistant clear coats. We work around business hours when needed, keep the jobsite clean, and explain what the floor can and cannot hide (metallic will highlight bad patches if they are not corrected). As a licensed and insured epoxy contractor, we focus on durable outcomes that still look sharp under bright lighting.
Before we start, we walk the slab with you and confirm the look, color direction, and slip-resistance target, then protect walls, baseboards, and door thresholds. At completion, we do a final walkthrough, verify coverage and gloss consistency, and provide cure and care instructions, including when you can walk, move furniture, or drive on the floor. You receive a written estimate, a documented coating schedule (primer, base, metallic layer, clear topcoat), and simple maintenance guidance using pH-neutral cleaners and soft pads. If you are calling about a damaged metallic floor, we will identify the failure point (moisture, contamination, poor prep, worn topcoat) and recommend the most cost-effective repair path.
Most residential garage floors are completed in 1-2 days depending on repairs and the system selected. Cure time varies by product and conditions, but many polyaspartic topcoats allow faster return-to-service than epoxy-only builds.
Light foot traffic is often possible within 12-24 hours, with vehicles commonly 24-72 hours after the final coat depending on temperature, humidity, and the topcoat used. We provide exact timing at the walkthrough.
Yes. We can add traction media such as aluminum oxide or polymer grit to the clear coat, or use a flake texture that improves grip while still cleaning easily.
Some epoxies can amber with UV exposure. For areas that get sunlight, we typically recommend a UV-stable polyaspartic or aliphatic urethane topcoat to reduce discoloration.
Sometimes. We evaluate adhesion and thickness, then grind to a sound surface or remove failed coatings. If the existing layer is peeling or contaminated, removal and re-coating is the reliable route.
Metallic epoxy flooring is a multi-layer, 100 percent solids coating system designed to create a deep, reflective finish with a one-of-a-kind marbled pattern. Elite Epoxy Cape Coral installs new metallic floors and repairs worn or failed systems for garages, home gyms, retail spaces, restaurants, offices, and showrooms throughout Cape Coral. Because metallic effects are created by how pigments move in the wet film, the best results come from careful slab prep, controlled application conditions, and a clear, UV-stable topcoat that protects gloss and color over time.
Our process starts by evaluating the concrete for cracks, oil staining, laitance, and moisture vapor transmission that can cause bubbling or delamination. We prep with professional grinders, vacuum with HEPA filtration, then patch and level so the metallic layer reads clean under high gloss. Next comes the primer and base coat, followed by the metallic epoxy layer where the visual effect is built using squeegee and roller techniques, plus spiked-shoe walkback to blend and remove marks.
For Cape Coral’s humid climate, we schedule and stage the work to manage cure windows and reduce debris in the finish. The system is then protected with a clear coat chosen for the space, often polyaspartic for faster return to service and strong UV stability, or polyurethane for excellent abrasion resistance. We can add aluminum-oxide grit to help wet traction without ruining the metallic depth.
If you already have metallic epoxy flooring that is dull, scratched, or peeling, we diagnose the cause first, then recommend a fix that matches the floor’s condition and your budget. Some floors only need a sand and re-topcoat, while others require removal of failed layers and a full rebuild from the primer up. Request a free written estimate to compare options and get a realistic timeline for install, cure, and return to normal use.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Cape Coral. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
