Commercial · Cape Coral, FL
Commercial epoxy floors only perform as well as the concrete profile under them, so epoxy floor prep is the job. Serving Cape Coral since 2015, we grind and shot blast slabs to the right Concrete Surface Profile (CSP) for long-wearing epoxies, urethanes, and polyaspartics.
Prep starts with evaluating the slab, coating history, and traffic demands, then choosing mechanical removal over acid etching for reliable adhesion. We use planetary diamond grinders with HEPA dust collection for coating removal, high spots, and laitance, and we use shot blasting to open dense concrete and create a uniform anchor pattern. Crack chasing, joint prep, and spall repairs are handled with fast-setting epoxy mortar or polyurea fillers so the base is solid before any primer, build coat, or broadcast system goes down.
Cape Coral’s humidity, wet seasons, and frequent washdowns can push vapor transmission and hydrostatic pressure through slabs, so we verify moisture conditions before coating. We test with ASTM F2170 in-situ RH probes when needed and spot-check surface pH and porosity, then select the right primer, including moisture-mitigating epoxy where the numbers demand it. Once the surface is properly profiled, we tailor the finish to the space, from slip-resistant quartz broadcast and aluminum-oxide grit to smooth, easy-clean urethane topcoats for food-service and light manufacturing areas.
Commercial clients choose us because we do the unglamorous part correctly and document it. You get straight answers on what the floor needs, what can be saved, and what must be removed, whether it is old epoxy, glue mastic, paint, or tire-marked sealers. Our licensed and insured crew brings commercial-grade grinders, shot blasters, edge tools, and industrial vacuums, and we plan around operating hours to reduce dust, odor, and downtime.
Before coating begins, we walk the slab with you and confirm the scope, repair locations, and acceptance expectations, including CSP target, edge detail, and slip rating goals. After prep, you can expect a clean, uniformly textured surface with properly opened pores, addressed cracks and joints, and no weak, glossy, or contaminated areas left to cause delamination. We finish with a clear plan for primer and coating steps, cure times, and protection, plus a written estimate that spells out equipment, materials, and schedule.
Most residential garage floors are completed in 1-2 days depending on repairs and the system selected. Cure time varies by product and conditions, but many polyaspartic topcoats allow faster return-to-service than epoxy-only builds.
Light foot traffic is often possible within 12-24 hours, with vehicles commonly 24-72 hours after the final coat depending on temperature, humidity, and the topcoat used. We provide exact timing at the walkthrough.
Yes. We can add traction media such as aluminum oxide or polymer grit to the clear coat, or use a flake texture that improves grip while still cleaning easily.
Some epoxies can amber with UV exposure. For areas that get sunlight, we typically recommend a UV-stable polyaspartic or aliphatic urethane topcoat to reduce discoloration.
Sometimes. We evaluate adhesion and thickness, then grind to a sound surface or remove failed coatings. If the existing layer is peeling or contaminated, removal and re-coating is the reliable route.
If your coating is peeling, hot-tire lifting, or wearing through early, the root cause is usually poor epoxy floor prep, not the epoxy itself. Elite Epoxy Cape Coral provides commercial concrete grinding and shot blasting that creates the correct mechanical bond for epoxy primers, high-build systems, flake and quartz broadcasts, and urethane or polyaspartic topcoats. We remove weak surface paste, old coatings, and contamination, then leave a consistent Concrete Surface Profile (CSP) so the coating system performs under foot traffic, carts, forklifts, and daily cleaning.
Our epoxy floor prep process starts with a jobsite review of the concrete condition and the existing surface, including paint, sealers, tile adhesive, or old epoxy. We choose the right removal method for the substrate: planetary grinding for coating removal and leveling, shot blasting for uniform texture and opening dense slabs, plus detailed edge grinding where machines cannot reach. Where needed, we address oil spots with mechanical removal and targeted degreasing, then verify the slab is clean and porous before priming.
Moisture matters in Southwest Florida, especially on slabs that see frequent washdowns or sit on grade. When conditions warrant, we use ASTM F2170 in-situ RH testing and pair results with the right primer selection, including moisture-mitigating epoxy to reduce the risk of osmotic blistering and delamination. We also prep control joints and cracks properly so they do not telegraph through the finished coating and create future maintenance issues.
A properly prepped floor is easier to coat, easier to maintain, and far less likely to fail. After prep, you receive a clear walkthrough of what was removed, what was repaired, and what coating steps come next, including slip-resistance options like quartz and aluminum-oxide traction additives. If you need commercial epoxy floor prep in Cape Coral, we will provide a written scope, realistic schedule, and a free estimate so you can plan your project with confidence.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Cape Coral. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
